In addition to purchasing spent catalysts and metal residues, Metal & Catalyst Resources sells similar materials for metallurgical and chemical purposes. MCR is also a seller of magnesium ingots, calcium/magnesium ingots, vanadium products, molybdenum products, nickel products, and tellurium dioxide.

Please visit a Products page to gain deeper insight into these materials sold by Metal & Catalyst Resources. Additionally, if you wish to purchase or to sell a material or metal that is not listed within this website, or if you have any questions or comments, please contact Metal & Catalyst Resources for further discussion.


Nickel Sales

MCR is a seller of alnico (aluminum, nickel, cobalt) alloy, nickel carbonate, nickel oxide, as well as nickel spent materials, nickel concentrates, nickel residues, and nickel containing scrap.

Please contact the Commercial Department of Metal & Catalyst Resources to describe your requirements for Nickel products.

Nickel Oxide

MCR is a manufacturer of black nickel oxide. This oxide is produced from a nickel carbonate raw material with a compound purity of 99.8%. Typical specification ranges for this black nickel oxide are:

  • 68 – 78% Nickel Content
  • 10 – 100 m2/g Surface Area
  • mv of 2 – 25 μm Particle Size

The reason for the range in specifications is that MCR has the capability during production of the black nickel oxide to selectively target various nickel content and surface area parameters, and has the post-production ability to mill the nickel oxide to finer particle sizes, based on customer requirements.

Please contact MCR’s Commercial Department to discuss your nickel oxide requirements and/or if you have any questions about our products.

Cobalt Sales

Metal & Catalyst Resources is a seller of Cobalt products for metallurgical and chemical uses.

MCR’s Cobalt products include:

  • +99% pure Cobalt Oxide
  • Alnico (Aluminum Nickel Cobalt) alloy of varying compositions
  • Cobalt containing spent catalysts and residues
  • Cobalt Salts

The actual compositions of these products vary based on client needs and end-use applications. Please contact MCR’s Commercial Department to discuss your specific needs.

Molybdenum Sales

Metal & Catalyst Resources sells molybdenum products for chemical, catalyst, and metallurgical use.

MCR’s molybdenum products take the form of:

  • Ammonium Hepta Molybdate
  • Ammonium Di Molybdate
  • Molybdenum Disulfide
  • Calcium Molybdate
  • Chemical Grade Molybdenum Oxide (MoO3)

The actual compositions of these products vary based on client needs and end-use applications. Please contact MCR’s Commercial Department to discuss your specific needs.

MCR is also a seller of inert ceramic support, or diluent (sized 5mm or 6mm in diameter), that are often mixed with molybdenum catalysts. These beads are separated from spent catalyst, and are then washed, cleaned, and dried. The beads can then be reused as refurbished inert rings.

Contact Metal & Catalyst for more information.

Vanadium Sales

Metal & Catalyst Resources sells vanadium products for metallurgical use, and for use in pigments, chemical products, and catalysts.

MCR’s vanadium products take the form of:

  • vanadium pentoxide (in powder or fused flake form) (V2O5)
  • sodium vanadate
  • sodium ammonium vanadate
  • ammonium metavanadate
  • ferrovanadium

The actual compositions of these products vary based on client needs and end-use applications. Please contact MCR’s Commercial Department to discuss your specific needs.

Copper Sales and Zinc Sales

MCR sells various types and compositions of copper concentrates, spent materials, and residues; as well as zinc oxide dust, spent materials, and residues; for use in agricultural and metallurgical applications.

Please contact Metal & Catalyst Resources’ Commercial Department to discuss your requirements for copper or zinc products.

Tellurium Dioxide Sales

Metal & Catalyst Resources’ Tellurium Dioxide is packaged, as a standard, in 25 kilogram (55.11 pound) pails. Nonstandard packaging can be accommodated if necessary, and must be discussed with MCR’s commercial department prior to shipment

A typical analysis of MCR’s TeO2 is as follows:

  • Te: 79.72%
  • Na: 0.045%
  • Al: <0.001%
  • S: 0.013%
  • Ca: 0.004%
  • Cr: <0.001%
  • Mn: <0.001%
  • Fe: 0.002%
  • Ni: <0.001%
  • Cu: <0.001%
  • As: <0.001%
  • Se: <0.001%
  • Pb: <0.001%
  • Mg: <0.001%
  • Cd: <0.001%

To inquire about MCR’s tellurium dioxide, please contact the Commercial Department.

Other

MCR is supplying now, or has in the past supplied, the following products to its customers:

  • +98.5% purity Sulfur
  • Magnesium ingots
  • Calcium Magnesium ingots
  • Ammonium Perrhenate
  • Selenium metal powder
  • Rhenium metal
  • Tantalum metal scrap
  • Ores of manganese, tantalum, or tungsten

The above lists are not all inclusive, and we at MCR will happily work with you on a case by case basis to locate low cost suppliers of raw materials. Please contact the Commercial Department at MCR to discuss your needs.